Sonoma Estate: One Motor, Six Panels, 42 Feet of Lift-and-Slide Glass


At a private estate in Sonoma, California, a 42-foot bi-parting lift-and-slide glass wall connects the great room to the surrounding landscape. Six panels, weighing a combined 3,180 pounds, pocket into opposite sides of the opening to transform the enclosed room into an open-air pavilion.
A wall of this size would typically use two motors, allowing each side to operate independently. For this project, however, the architect wanted a single motor to control all six panels together.
Achieving that unified movement required more than selecting a motor with enough capacity. Door Automation Systems (DAS) developed a configuration using more than 120 feet of drive belt, custom attachment hardware and a horizontally mounted Everest motor.
The project: A 42-foot bi-parting glass wall
The Sonoma Estate installation features a Weiland lift-and-slide system with six panels arranged in a bi-parting configuration. Three panels pocket to each side, creating an unobstructed 42-foot opening when fully retracted.
Each panel weighs 530 pounds, bringing the combined weight to 3,180 pounds, or 1,590 pounds per side.
Lucent specified the door system, while XL Glass handled the specialized lifting and installation of the panels. DAS engineered and installed the automation.
The objective was to operate the entire wall with one motor, allowing both sides to open and close together.
Automating both sides with a single motor
Large bi-parting door systems commonly use two motors, one for each side of the opening. This allows the panels to operate independently, giving occupants the option to open one side or both.
The Sonoma Estate design called for a different approach. A single motor would operate all six panels, providing coordinated movement across the full opening.
To achieve this, DAS engineered a continuous drive system using more than 120 feet of belt. The system connects both sides of the wall to one Everest motor, allowing the panels to move together rather than relying on separate motors and controllers.
This configuration also introduces a trade-off: the two sides cannot operate independently. Opening or closing the wall moves both sides together.
For this project, unified operation was a deliberate architectural choice, and the automation was designed to accommodate it.
Custom belt clamps for limited overhead clearance
One of the most significant engineering challenges came from the Weiland door system itself.
The system provides less than a quarter inch of clearance above the panels, leaving insufficient room for standard belt attachment hardware.
DAS developed custom belt clamps designed to fit within that limited space while providing the connection required to transfer movement from the drive belt to the heavy glass panels.
This allowed the single-motor configuration to work with the existing door system without compromising the intended appearance or operation.
The custom hardware was a critical part of the installation, demonstrating why door system clearances need to be evaluated alongside motor selection when planning automation.
Selecting and positioning the Everest motor
DAS selected its Everest motor to operate the six-panel system.
Although the combined panel weight of 3,180 pounds falls within the Everest's published capacity, the configuration also had to accommodate the exceptionally long belt run and coordinated movement of both sides.
Motor placement presented another consideration. The Everest was installed in a horizontal configuration, an arrangement suited to installations with limited vertical space above the opening.
Horizontal mounting allows the motor to be positioned within constrained overhead conditions, including applications involving structural steel.
For a large architectural opening, coordinating motor placement with the header and surrounding structure is essential to accommodating the automation system without interfering with the design.
DAS provides horizontal configuration drawings to help architects and builders plan these requirements.
Additional automation in the kitchen
The large sliding wall wasn't the only automated opening at the Sonoma Estate.
In the kitchen, a tall, narrow window behind the sink features a black-framed glass panel that slides horizontally under power, opening the space to the landscape beyond.
While considerably smaller than the 42-foot wall, this installation demonstrates how automation can be integrated into different types of openings throughout a residence.
What architects and builders can learn from this project
The Sonoma Estate installation demonstrates that a single motor can operate a large bi-parting glass wall, provided the complete system is engineered for the application.
Several considerations are especially important when planning an opening of this scale.
Determine how the panels need to operate
One of the first decisions is whether the two sides should move together or independently.
A single-motor configuration can provide unified operation, while two motors allow each side to be controlled separately. The desired functionality should be established early, since it affects the drive configuration and automation requirements.
Evaluate the complete drive system
Panel weight is an important factor in motor selection, but it isn't the only consideration.
The number of panels, belt length, door hardware and operating configuration all influence the engineering requirements. At Sonoma Estate, the combination of six heavy panels and more than 120 feet of drive belt made the overall system design particularly important.
Verify door system clearances
Not all lift-and-slide systems provide enough space for standard automation hardware.
The Weiland system's limited overhead clearance required DAS to develop custom belt clamps. Identifying these constraints during design allows any necessary modifications or custom components to be planned before installation.
Coordinate motor placement with the structure
Large automated openings require space for motors, drive components and supporting hardware.
At Sonoma Estate, a horizontal Everest configuration accommodated the system's mounting requirements. Establishing these details early helps avoid conflicts with structural framing and architectural finishes.
For more information about motor selection, installation requirements and system configurations, see our guide to automating lift-and-slide doors.
Frequently asked questions
Can one motor operate a 42-foot bi-parting glass wall?
Yes. At Sonoma Estate, DAS automated a 42-foot Weiland lift-and-slide wall with six panels weighing a combined 3,180 pounds using a single Everest motor.
The configuration required more than 120 feet of drive belt and custom attachment hardware. Feasibility for other projects depends on panel weight, door system requirements, available mounting space and the overall drive configuration.
Why does belt length matter in a large sliding door system?
A longer belt run introduces additional considerations for drive configuration, tension, alignment and system performance.
At Sonoma Estate, the single motor needed to operate panels on both sides of the 42-foot opening through more than 120 feet of belt. The motor and drive components were selected and configured for those requirements.
Why were custom belt clamps necessary?
The Weiland lift-and-slide system provides less than a quarter inch of clearance above the panels, which was insufficient for standard belt attachment hardware.
DAS developed custom clamps that fit within the available space and connected the panels to the drive system.
Can the two sides operate independently with one motor?
Not with the single-motor configuration used at Sonoma Estate. Both sides are mechanically connected to the same drive and operate together.
Projects requiring independent operation of each side can use a dual-motor configuration.
Who was involved in the Sonoma Estate installation?
Lucent specified the Weiland lift-and-slide system, XL Glass handled the lifting and installation of the 530-pound panels, and DAS engineered and installed the automation.
Learn more about the lift-and-slide door systems used in large residential openings.
Planning automation for a large sliding glass wall
Sonoma Estate demonstrates how a large bi-parting opening can be automated with a single motor when the drive system, door hardware and mounting requirements are coordinated from the outset.
The 42-foot wall required a custom approach, from the extended belt run to the attachment hardware designed around the Weiland system's limited clearance.
For architects and builders considering a similar installation, early coordination helps determine the appropriate motor configuration and identify any custom requirements before construction begins.
Explore more DAS projects, or contact DAS with your door schedule, panel weights and opening dimensions to discuss automation options.



